3KW 220V Electric Swimming Pool Hot Tub Water Heater 48MM Thermostat Ce

HELPFUL LINKS Add Favorite Sellers Sign up to Newsletters View Feedback Ask seller a querstion Visit seller's classifieds board Shop About Seller Page PAYMENT 220V 3KW Swimming Pool 1.89" Interface Electric Water Heater Thermostat WATCH THIS ITEM EMAIL A FRIEND Product Description Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat's normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. Operation Instruction: Normal Operation: The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature.

User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. Heating Rate: The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40℃ (104℉). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8℃ (11 to 14℉) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Heating Up: Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically.

It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button: In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49℃(120℉) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately.

In order to reset, let the water cool down to approximately 38℃ (100℉), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. Lack-water protection: The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation (water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running.

Mechanical installation: Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat.

Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. Electrical installation: When using electrical products basic precautions should always be followed, including the following: All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection.

The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Power supply: Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz.

The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Note: Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. Feature The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology.

When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe.

Specifications Material: Metal Voltage: AC220-240V/50-60Hz Power: 2.7-3.3KW Current: 14A Wire: 3*4mm² Pipe Dimeter: 1"/2.54cm Size: 340 * 122 * 125mm/13.4*4.8*5inch Net Weight: 2kg/4.4lbs Phase Parameters: Single Phase Suitable For: Hot Tub & Swimming Pool Equipment Package Content 1 x Water Heating Thermostat 2 x Interface 1 x Manual Notes：We won't ship to VIRGIN ISLANDS, PUERTO RICO, ALASKA, HAWAII and GUAM for free. We need to caculate the shipping fee additionally. BUY IT, We will contact you and caculate for you. About Us Payment Returns Customer Support Warranty FAQ Shipping Welcome to our classifieds board store. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years.

We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. We accept Paypal payment only. Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.

We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution. 1 Ship from Rancho Cucamonga, CA, and only to classifieds board ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out.

Once your payment is completed, pls inform us by phone or leave a classifieds board note if the changes are needed before we send the product. If you have any changes, pls inform us 17:00pm-24:00pm (Pacific Time Zone) PST in the same day. 2 If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. 3 International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

4 Orders placed on weekend will be shipped within 2 days. 5 UPS/FEDEX: 3-5 business days. | USPS: 2-6 business days. | Truck company: 3-8 business days. 6 We only ship to the Lower 48 states, and we do not ship to FPO, APO or PO Box addresses.

1 All of our items are backed with a 60-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation 2 Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted.

If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 3 We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. 4 We reserve the rights to refuse any returns for objective reasons.

Email Customer Support: 9:00am-2:00am PST Sunday-Friday All emails will be responded to within 12-24hours Note Leave a Message if: You want to cancel an order All Refund concerns and questions Technical Questions If you need further assembly instructions for a product Any other unspecified questions or concerns. 1 This item comes with 24 months Manufacturer's Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing. 2 If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem. 3 Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.

4 Replacement products are provided with the same warranty as the returned products. Q: How do I pay for my purchase? A: Our classifieds board store only accepts the payment method Paypal. Q: When will the item be shipped out? A: The item will be shipped within 1 business day once payment completed.

The item will be shipped out to you in the same day if the order is made before 15:00 and next-day shipping will be arranged for payment after 15:00. Q: Where do you ship from? A: The item ships from Rancho Cucamonga, CA, United States. Q: Where is my tracking number? A: Please log on your account.

Click ”my classifieds board”----->”My Summary” or open your emailbox and find the shipping notification email. Q: How do I return an item? A: Our classifieds board store accepts return. Item must be returned within 60 days. Refund will be given as money back.

Please contact our customer service before you return an item. Q: Can you ship to my country / PO Box / Hawaii / Alaska / Puerto Rico / APO? A: We do not ship to FPO, APO or PO Box addresses.