Hot Tub Heater Control Digital Spa Controller Pack Smtd 2000 Acc 120/240V New

NEW spa control system, complete, by ACC, Applied Computer Controls, model SmarTouch Digital 2000, controls 2 pumps and air blower, or 3 pumps, plus light, and power output for an ozonator too, with all power cords and users manual, warranty card, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes 4000 watt stainless steel high flow 4.0kw heater, 15" long, standard size. The listing includes ground shipping fee to lower 48 states! Make us an offer!

Additional detail: -This Smartouch Digital Control comes with 4kw 15" heater, Large 3.25x7.25" Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Topside drops into 2.5x6.5" cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. -Runs a main 2 speed spa pump, and a second pump, and an air blower or 3rd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. -Comes with new power cords for your main 2-speed pump and second pump, with quick disconnect plugs to the control.

You also get quick disconnect plugs and short 'pigtail' cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. -Includes 15 inch long stainless steel high flow 2" heater, with standard 4.0kw Incoloy element. Can be used on 115/120v or 230/240 volts, it's changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15" heater now.

-the Smartouch SMTD 2000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD2000 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard.

You can ask us and we can change voltages for you and test prior to shipping. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2" or 2" PVC pipe size systems -User's Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Nice unit, replaces most any existing spa control system, and is less costly than buying a new motherboard and topside in most cases.

ACC Factory Warranty 24 months from date of manufacture against factory made defects, does not cover abuse, miswiring, lightning strikes, labor, freight, etc.. Control box stands 14.6" tall, and 15.4" wide, 5.5" deep, heater is 15" flange to flange. Designed, built and tested in the U.S. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years.

This goes out within 2 business days after receipt of payment via ground shipping, to your street address, sorry, no P.O. Boxes. Shipping included is to LOWER 48 STATES ONLY. Questions? Please ask before you buy, please. Package includes: Smartouch Digital Control by ACC model SMTD2000 15" 4000 watt stainless steel high flow 4.0kW heater with standard threaded couplings for 2" PVC plumbing. Large digital display keypad (topside) 3.25x7.25" with 57" long cable.

(Extension cords available at extra cost) Drops into 2.2x6.2" cutout. Two (2) pump 4-wire power cords, 48" long with quick disconnect AMP plugs and motor connectors. 14/4 wire size. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire.

Light pigtail with quick disconnect AMP plug, 18 ga wire ACC warranty cardadditional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Warranties do not cover freight costs. Standard stuff, but just fyi, so you are aware.

Check out my other items! Be sure to add me to your favorites list!