Onga Balboa Spa Bath Tub Hot Pump Electronic 2394 Maintain Temperature @ 38c

THIS MODEL PUMP WILL BE AVAILABLE AS OF THE 15/1/21 ONGA BALBOA SPABATH SPA BATH TUB HOTPUMP MODEL 2394 complete package 1 X 23940100 Pump (comes with data cable) 1 X 411400 Bath Master Touchpad 1 X 511920 Decal Rectangle shape 1 X 410593 Chrome rectangle Escutcheon PRODUCT DESCRIPTION NOTE=THIS PUMP IS FOR AN INDOOR BATHROOM SPABATH IT IS NOT SUITABLE FOR ANY OUTDOOR SPAPOOL/JACUZZI/SWIMSPA DescriptionIDEAL FOR: Spa bath (whirlpool spa bath) applications giving maximum performance for the ultimate relaxing bath experience. Suitable for spa baths. Not designed for Spa Pools. FEATURES: Dedicated heating element located in the Full-Flow of water Touch Pad and Cable are include Switch Heater Element off whilst still running the pump Highly efficient motor Dry Run Protection AU certification Quiet operation Internal design to ensure the pump self drains eliminating the build up of unhygienic/stale water ADVANTAGES: In built heater will raise the temperature of the water 2.5°C per hour when blower is off Excellent hydraulic performance Gain peace of mind with a quality brand Balboa (Formally Onga) Compact and extremely quiet design Designed to circulate hot water in (whirlpool) spa baths BENEFITS: Maximises the bath water temperature Maintains the temperature of the water if blower is fitted and activated Pump turns off if lack of water to protect pump Ready to use straight from the box Save money on your energy bill Super quiet operation Consistent reliable performance over the life of the pump Comes with a 12 month nationwide warranty SPECIFICATIONS: Output: 1.25 Hp Outlet: 40 mm Barrel Union Inlet: 40 mm Barrel Union Primary Heating Temperature cut-out 40o C Secondary “Safety” Heater cut-out 45o C IP Rating IP55 Noise 65 dBa @ 1 metre Size: 427 x 260 x 144 mm WARRANTY: 12 Month Manufactures WarrantyPUMP OPERATION - Important! • Never run pump dry!

Running pump dry may damage seals, causing leakage and flooding! • Do NOT block pump suction! To do so with body may cause severe or fatal injury. • Small children using spa bath must ALWAYS have close adult supervision! • Do NOT block jets!

To do so may flood area causing damage to equipment and water damage to surrounding areas. • Before filling and starting your spa bath (whirlpool spa), ensure that the spa bath is free from debris or foreign material as irregular pump conditions may occur. • Before switching on, fill the bath to a minimum 50mm above the spa jets. WARNING Hazardous voltage. Can shock, burn or cause death.

NOTE: HOT PUMPS • To ensure that the over temperature sensor does not activate whilst filling the bath and thus preventing the pump heater from operating, fill the bath with cold to luke warm water until water level reaches the suction cover. • Water temperature greater than 40OC may make the heating element inactive. Pump without heater function: • Pump models 2376, 2386, 2396 and 2406 are controlled by a touch button and will circulate the spa water. • Do not include an integrated heater element. Hot Pump Function (Electronic Models): • Pump models 2374, 2377, 2397, 2394, 2404 and 2407 are manufactured with integrated heating element and control devices to maintain water temperature and compensate for the natural cooling of the spa bath.

• The heater function is designed to only operate with the hydromassage pump at normal operating pressure. The combined operation of the heater and pump is controlled from the bath by a touch pad. THE BATHMASTER CONTROLLER Pump Models 2374, 2394, 2404 have special built in safety features for your benefit. The touch pad has 2 or 3 buttons on it: 1. “JETS” button – turns on/off the pump and integrated heater. 2.

“HEAT” button – enables the heater to be turned on/ off whilst the pump is running. 3. If equipped with an optional blower, the touch pad will have an optional “AIR” button. 1. Non Priming Protection This feature prevents damage to the pump from occurring in the event of the pump being activated where there is no or insufficient water in the bath for the pump to operate satisfactorily. If the pump fails to gain prime after 2 minutes of operation, the pump will shut down and will be “locked out” of operating for another 10 seconds. This will be indicated by an orange light flashing at the ”Jets” indicator on the touch pad.

After 10 seconds the unit will revert back to standby mode. 2. Loss Of Prime Protection This feature protects the bath occupant from injury resulting from a “blocked suction” scenario. It will also prevent damage to the pump from occurring as a result of the pump operating without water flowing through it. If at any stage during the normal operation of the pump, the pump loses prime (e.g., a blocked suction scenario) the pump will shut down if it cannot regain prime within 3 seconds. The pump will remain in “lockout” for a further 10 seconds.

This will be indicated by an orange light flashing at the “Jets” indicator on the touch pad. After 10 seconds the unit will revert back to standby mode. 3. High / Low Voltage If the pump’s power supply falls outside the normal preset voltage parameters (as set by the Electrical Suppliers), the pump will shut down and remain in “lockout” until the power supply returns to normal. “Lockout” due to voltage fluctuations will be indicated by a green and/or red light flashing at the “Power” indicator on the touch pad. Once the power supply returns to normal the pump will revert back to standby mode.

Hazardous suction. Can trap hair or body parts, causing severe injury or death. WARNING DO NOT BLOCK SUCTION roundbathcompanyselling and installing onga balboa pumps for over 40 yearsspecify onga with your next spa order from roundbathcompany when completing your purchase please supplyfull addressphone numberemail address thankyou