Pool Heat Exchanger, 25KW Stainless Steel Tube Shell Heat Exchanger, Salt Wat...

Pool Heat Exchanger, 25KW Stainless Steel Tube Shell Heat Exchanger, Salt Wat... 【QUALITY MATERIAL】This swimming pool water heater is made of high grade anti corrosion stainless steel, which has the characteristics of anti rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. With 45mm/1.77in side female thread, 32mm/1.26in front and rear female thread and 230℉ (110℃) maximum operating temperature.【CONSTANT TEMPERATURE DESIGN】This SPA heat exchanger adopts an innovative in line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. It is heated by water, and the cold water is turned into hot water by heat energy, which is heated circularly, suitable for the use of solar panels.【STRONG HEAT CONDUCTIVITY】This above pool heater is specially designed built in flow limiter aims to minimize the pressure loss in the heating system and ensure maximum heat exchange. The temperature rise of the pool that is open for a long time in summer is 1 ℉ per hour, the temperature rise of the pool that is only used for a short time is 20 ℉ per hour. It gets hot immediately without waiting.【WIDELY APPLICABLE】This hot water heat exchanger is equipped with stainless steel fixed bracket and compact size, minimum installation space is required, easy to install and use.

It is a very safe, reliable, efficient and cost effective way to heat swimming pools or spas through any hydraulic system. Suitable for hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc.【100% QUALITY ASSURANCE】We are very confident in the quality of this stainless steel shell and tube heat exchanger, and provide 24 months warranty or refund for it. Please feel free to us if you have any questions about your purchase. We will solve your problem within 24 hours. Specification: Item Type: Swimming Pool Heat Exchanger Material: Stainless Steel Color: As shown in the picture Product Size: Approx.

27.5x16cm / 10.8x6.3in Weight: Approx. 3082g / 108.7oz Side Thread: Female thread 45mm / 1.77in Front and Rear Threads: Female thread 32mm / 1.26in Specification: 25KW Maximum Working Temperature: 230°F (110°C) Application: Suitable for all types of swimming pools, spas, hot tubs hot springs Pool area (gallons) Requires increased temperature 1℉/hour Requires increased temperature 2℉/hour Required boiler (btu/hour) Model of heat exchanger Required boiler (btu/hour) Model of heat exchanger 2000 16.683 MF-80 33366 MF-80 4000 33.366 66732 6000 50.049 / / 8000 66.732 / / 10000 83.415 / / How to Use: 1. First of all, determine the heating rate of the pool water. Usually, the temperature rise requirement of the swimming pool that is open for a long time in summer is 1°F per hour (1°F=0. 56°C), while the temperature rise requirement of the swimming pool only for short‑term use is 20°F per hour. 2.

Calculate the volume of the pool (in gallons: 1 cubic meter = 264. 2 gallons). Package List: 4 x Accessories 1 x Swimming Pool Heat Exchanger 1 x Instruction Manual Note: 1. Please allow 1‑2in error due to manual measurement. Thanks for your understanding. 2.

Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. No electricity. Seller's Notes Kindly note that some items may not be eligible for delivery to PO BOX addresses. Delivery addresses in remote or under-capital areas may incur an additional postage charge.