Pentair Mastertemp / Waterco Turbotemp Hsi Igniter & Gasket Kit

Igniter & Gasket Kit For Pentair Mastertemp, Waterco Turbotemp, Sta-Rite Max-E-Therm Gas Pool & Spa Heaters - 200 / 300 / 400 HD models.  Numbers 2, 3 & 4 in the Diagram. As per manufacturer's specifications, these igniters should test 50-500Ω. Note that generally, we replace igniters that measure over 90Ω, as anything higher suggests a fault. Pentair Mastertemp / Waterco Turbotemp Electrical Parts List: 2.

/ 3. / 4.  5.   60°C / 140°F 6.   55°C / 131°F 6b.  7.   /  10.

  12.  13.   /   15.  16.   For other Pentair Mastertemp / Waterco Turbotemp spare parts, click the correct category below: Pentair Mastertemp, Waterco Turbotemp, StaRite Max E Pro Error Codes: Diagnostic LEDs / Error Messages & Causes: PS - Check / Replace . Signifies flow issues. HLS - Check / Replace High-Limit Switch/es (faults above  or ) Signifies flow, bypass, governer issues, or other issues.

AFS - Check / Replace . Signifies fan, air flow, or other issues. AGS - Check / Replace  (faults above 60°C). Signifies flow, bypass,  issues, or other issues.  Can also be caused by a 45° Limit Switch on top of the manifold.

SFS - Check / Replace  (faults above 249°C). High or Low Flue Temperatures are a sign of significant combustion issues, or other issues. E01 -  Fault. Replace . E05 - General Fault.

Needs service. This can be caused by several issues. Showing Incorrect Temperature - Replace Thermistor. Check all filters clean. If thermistor shows corrosion, water balance is poor. 77707-0054